I just checked all 6 channels of my HK6DF radio, and they all work fine operating servos. You might have a 4 channel receiver that is marked 6 channel. I'm not an HK salesman, and I don't get commission. I hesitated using the cheap radios when I got back into RC a couple of years ago and bought a $200 Futaba to have at least something that was reliable. My subsequent models have been fine with HK radios. My whole tank will cost about $450 including the radio. If I was using a Futaba, it would be over $600.
--- On Thu, 9/29/11, Cobra <[email protected]> wrote: From: Cobra <[email protected]> Subject: [TANKS] Re: Model T Experiment To: "R/C Tank Combat" <[email protected]> Date: Thursday, September 29, 2011, 6:34 PM I bought The 6 channel Hobby King radio in hopes to use it in my tank, but I could not get the 5 and 6 channels to do anything. I finnaly tok it to the experts at the hobbyshop and they could not get it to work either. I could drive and rotate the turret and move the gun, but not pull a trigger. They finnaly came to the conclusion that 5 and 6 were some sort of trim adjusters that could not opperate thier own component. If some one figures out how to make it work where 5 or 6 can function normaly, let me know. But my advice is to avaoid the cheap HK radios. Aaron "has a bad taste in his mouth from HobbyKing" Freeman -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat
