In a message dated 3/26/2012 12:13:00 P.M. Eastern Daylight Time, [email protected] writes:
On Chris's posted example. This is from a first-gen tank that has never battled and one which Chris inherited. Please take what Chris says on this topic with a grain or salt as he has no direct battle experience with rotate mechanisms. Steve Tyng my not battling has no bearing on this topic as he was looking for info on different ways of making his turret rotate and any input. i posted pictures of what was currently in the tank being use and would offer any other pictures if he in need of them. i didn't not say it was the best configuration, i did not say it was the worst. i did not say it works better than a turret that has once central bolt and bearing holding it to the hull supported and using a powered wheel (friction drive) to turn it, i did not compare it to belt / cog driven turrets or the laser cut gears, i just showed him what was in the Tiger as per part of his inquiry asking for any input. Chris (just remember, even the smallest grain of salt can hurt like hell when properly used) -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat
