You will have much trouble trying to weld to roller chain. The grease/lube that is on and in the chain will make conductivity problematic, and cause all sorts of issues with trying to lay down a bead or even a spot. Do yourself a favour, don't bother trying. If you are dead-set on this, then I suggest intense soaking, scrubbing, more soaking, in some sort of very nasty acidic solution to remove all traces of grease and lube, then try your welding, and when you're done welding, lubricate/grease the hell out of the chain again.
Tanks are supposed to rust, so don't worry about that. Some surface rust on your steel beast will add to its authenticity. Ben From: [email protected] [mailto:[email protected]] On Behalf Of Buck Cronk Sent: Tuesday, 3 April 2012 10:55 AM To: [email protected] Subject: [TANKS] Cromwell Tank I have done some thinking. I've got it in my head that it would be a good idea to use the T34/85 I am building out of plywood as a source of experience and as a parts tester. I may not even bother to finish the turret, since it has so many angles and curves that it wouldn't be worth the trouble to buy fiberglassing material (probably the best choice if I were to make a turret). I plan to just make sure the systems can fit inside it--as well as inside the Cromwell that I'm planning. I selected the Cromwell because it has the same number of road wheels as the T34/85, as well as the same basic idea for wheel configuration. In other words, if you look at pictures of both, as I did, the drive wheels, idlers, and bogies all appear to be in the same positions and the same size relative to the track. Another reason to choose the Cromwell was its boxy shape. Both turret and hull have no curves, and at least some tanks didn't even have the curved fenders carried by many other Cromwells. All this means I can replicate the Cromwell more accurately. The T34/85's turret wouldn't look good made with plywood, steel, or other materials that aren't easily shaped, but probably could only be made with a mold or plug and fiberglass or plastic. The Cromwell is probably a better choice for beginners unaccustomed to fiberglass or plastic. Not only this, I plan to build the Cromwell out of sheet metal. I want it tough. I just need to figure out how to attach sections to each other so they can be easily removed, preferably not using bolts. I was thinking pins or just a system of sliding them on and off. Maybe even hinges? Anyway, what I don't want taken apart I can weld. I will be looking for larger motors and thinking about using a KCM for turret rotation. Yeah, a drive motor for rotating a heavy metal turret. I just don't know about rust... I'll figure something out. Aluminum would be a good choice, but is harder to work with and more expensive here. I'll try a roller chain track system, directly welding steel onto the chain. All this after completing and testing all systems in the T34/85, which may get finished someday. Questions/comments/advice? -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected]<mailto:[email protected]> To unsubscribe, send email to [email protected]<mailto:[email protected]> Visit the group at http://groups.google.com/group/rctankcombat -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat
