Well, that would give me a better idea of the dynamic loads for the
springs.  I found some compression die springs on McMaster's site that
might work well to use in a custom shock absorber that would be mounted on
the outside of the tank connected to the swing arms.  I have the parts to
do that except for the springs.  I guess I'll error on the side of heavier
springs as opposed to lighter.  Thanks Frank and Steve.  Hopefully the
concept will pan out and I can get the KV-2 mobile soon.

Derek


On Thu, Apr 5, 2012 at 9:26 AM, Frank Pittelli <[email protected]>wrote:

> Take the total weight of your vehicle and multiply by 2 to approximate the
> dynamic load seen when dropping off something (like a small log). Then,
> divide that number by the total number of suspended axles to determine the
> approx load seen by each axle.  That should give you a reasonable estimate
> of the stiffness required.
>
>        Frank P.
>
>
> On 4/4/2012 7:23 PM, Derek Engelhaupt wrote:
>
>> Does anyone have any idea what the pound rating is of the springs they
>> use or how to calculate it?  I believe some of the springs I have are
>> rated for 18lbs, but that is way too little.
>>
>
> --
> You are currently subscribed to the "R/C Tank Combat" group.
> To post a message, send email to [email protected]
> To unsubscribe, send email to 
> rctankcombat+unsubscribe@**googlegroups.com<rctankcombat%[email protected]>
> Visit the group at 
> http://groups.google.com/**group/rctankcombat<http://groups.google.com/group/rctankcombat>
>

-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to [email protected]
To unsubscribe, send email to [email protected]
Visit the group at http://groups.google.com/group/rctankcombat

Reply via email to