I wasn't saying they couldn't, but the reason I didn't was weight.  The
wheel chair motors I had were about 15lbs/motor.  You add extra sprockets
to gear them up to about 300 RPM and the weight for each motor with gearing
starts to push the 20lb. mark.  Now the motors are plenty powerful enough
to pull a 250lb.+ person around so that's not a problem.  The weight comes
into play when you start adding a suspension.  Also, the shear size of the
motors limits the application.  I could barely fit the two motors in a
Tiger chassis side by side and that was without the gearing up hardware.
 So let's say you get creative mounting them side by side.  Now add the
extra length of the gearing up.  Right there you have eaten up a majority
of your internal space on the vehicle. For the price you can get the
wheelchair motors for, then add the cost of the gearing up, and the cost of
the lost space...there are better options IMO.  So by all means do what I
did.  Buy the motors, play with them, decide they aren't for your tank,
sell them for less than you paid for them, and then buy the right motors.
 I'm just sayin'......:)

Derek


On Tue, Apr 10, 2012 at 8:43 AM, Buck Cronk <[email protected]> wrote:

> so, gear them back up... they're plenty powerful. I just looked at
> T081... he used ATV starter motors for his tank, and at 12v it ran too
> fast. He had to run it on 6v to go slow enough... sounds like a
> definite motor possibility.
>
> On 4/9/12, Derek Engelhaupt <[email protected]> wrote:
> > There is nothing wrong with using wheel chair motors.  The issues are
> that
> > they are very heavy in most cases and geared to run very slow (like
> > 100-150RPM).  Most of our tanks run on the rule of 4's...or something
> > similar.
> >
> > *Joe's rule of 4's....
> > *
> >
> > *I recommend the *Rule* of *Fours*
> > *
> >
> > *>    4 inch DIA drive sprockets
> >>    400 rpm no load speed at each drive sprocket
> >>    400 in.lbf stall torque at each drive sprocket
> >>    4 mph with sufficient torque for full-skid steer *
> >
> >
> > Derek
> >
> > On Mon, Apr 9, 2012 at 6:57 PM, Buck <[email protected]> wrote:
> >
> >> I think I've gotten into this strange habit of assuming random nicknames
> >> just to "sign" my post...
> >>
> >> Buck "The Guy With The Strange Habit of Assuming Random Nicknames Just
> to
> >> 'Sign' His Post"
> >>
> >> On Monday, April 9, 2012 6:55:33 PM UTC-5, Buck wrote:
> >>
> >>> I just picked up a couple. Thanks, though! And sorry, Grandma! Hope you
> >>> find a new one soon... just kidding. What do you mean? I really would
> >>> want
> >>> to use wheelchair motors in a tank, as they are pretty strong... 24v
> >>> might
> >>> be best, but whatever has plenty of power.
> >>>
> >>> Buck "The Ruthless"
> >>> On Monday, April 9, 2012 6:12:37 PM UTC-5, Pete Arundel wrote:
> >>>
> >>>> Yes - but it depends on how ruthless you are . . .
> >>>>
> >>>> On Monday, 9 April 2012 19:22:08 UTC+1, Buck wrote:
> >>>>>
> >>>>> Anybody know of a good source for wheelchair motors?
> >>>>>
> >>>>  --
> >> You are currently subscribed to the "R/C Tank Combat" group.
> >> To post a message, send email to [email protected]
> >> To unsubscribe, send email to [email protected]
> >> Visit the group at http://groups.google.com/group/rctankcombat
> >>
> >
> > --
> > You are currently subscribed to the "R/C Tank Combat" group.
> > To post a message, send email to [email protected]
> > To unsubscribe, send email to [email protected]
> > Visit the group at http://groups.google.com/group/rctankcombat
> >
>
> --
> You are currently subscribed to the "R/C Tank Combat" group.
> To post a message, send email to [email protected]
> To unsubscribe, send email to [email protected]
> Visit the group at http://groups.google.com/group/rctankcombat
>

-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to [email protected]
To unsubscribe, send email to [email protected]
Visit the group at http://groups.google.com/group/rctankcombat

Reply via email to