I'm just using steel flat bar for my suspension arms with 1/2" carriage bolts. I cut a square hole in the steel and the square under the carriage bolt head interfaces with the square hole in the flat steel. The flat steel is a little less than 1/4" thick by 1.25" wide.
Derek On Mon, Jul 30, 2012 at 5:38 PM, Dirk Pitt <[email protected]> wrote: > I use L channel aluminum and bolts. Strong enough to hold 300lbs extra . > Compression springs with long 1/4" bolts hold the springs in place. > > -- > You are currently subscribed to the "R/C Tank Combat" group. > To post a message, send email to [email protected] > To unsubscribe, send email to [email protected] > Visit the group at http://groups.google.com/group/rctankcombat > -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat
