I ran across this interesting roller chain reduction by 
AmpFlow<http://www.ampflow.com/ampflow_gearmotors.htm>. 
 This is a triple reduction setup using only two shafts.  The unique and 
compact aspect is that the intermediate sprockets idle on the the motor and 
output shafts.  It appears to be using three 11 and three 21 tooth 
sprockets for a total of around 8:1 reduction.  The way this works is that 
the first 11 tooth sprocket is keyed to the motor shaft.  The first stage 
consists of a 21 and 11 tooth combined sprocket assembly (probably two 
standard sprockets welded together) which idle on the output shaft.  The 
second stage is the same thing but idling on the motor shaft.  The last 
stage reduction is a 21 tooth sprocket keyed to the output shaft.

ST


<http://www.ampflow.com/speed_reducer_internal_s.JPG>

-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to [email protected]
To unsubscribe, send email to [email protected]
Visit the group at http://groups.google.com/group/rctankcombat

Reply via email to