Im wondering about gears and pulleys now because I cant figure out the size of the large 3L V pulley in the transmission design. Also wondering if I should go to a chain drive system because I cant seem to find belt. 40 size chain for the tracks? I know thats labor intensive but I think I can get 35 or 40 size chain fairly easily here, even if its more money.
On Thursday, January 31, 2013 7:09:55 AM UTC-7, TyngTech wrote: > One works with the material at hand. My current project is being built > with 1' x 2' hobby birch plywood sheets. At 29" overall length, I've only > had to butt a couple of pieces. > > Steve > > > On Wednesday, January 30, 2013 4:40:46 PM UTC-5, Jacob wrote: >> >> I just started my new T34 tank build. One thing that I had to do was >> increase the inside width by about 5" to 17 3/4" in order to accommodate my >> wheelchair motors and the 35ah batteries that are 7 1/2" wide each. It also >> means that my tank will be just under 48" long when adjusted for scale >> size. I realize that its not quite an exact scale conversion in length vs >> width, but plywood comes in 48" so thats what I am using.. Nice birch >> hardwood plywood. Time to start the tablesaw up :)... > > -- -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat --- You received this message because you are subscribed to the Google Groups "R/C Tank Combat" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
