<https://lh3.googleusercontent.com/-C6mvJO6eTk0/Uz7QMaGL-pI/AAAAAAAAAKU/BaUY5kl-dyM/s1600/TheHero.jpg> Hello fellow tankers,
I have started an ONLINE build of the RC Combat Tiger I<http://www.sixtharmygroup.com/forums/showthread.php?t=20518>. (click on link) It looks similar than the Tiger I brought to Gettysburg last fall, but it's in fact quite different 1. It has a "Hybrid Body" - ABS outer shell and 18-gauge steel inner shell - it saves about 20 lbs in weight, it's easier to "Detail", and would have less problem with signal reception. 2. The swing arm suspension is now TWO layers of 12-gauge steel with a wrap-around plate with hex lockers. Tyng Tech helped me in the design of this system. Very clever! [last fall, I bent the front/left swing arm on a sharp turn... welcome to large scale warfare!] 3. Addition of many features, fuse block, E-switch, now fully setup with Talon SR ESC. This tank will be shipped to Michigan to be upgraded with the newest Wifi/PS2 designs and a Hero (see photo). The Hero should eliminate Switches and Mixer, and should provide low voltage feed to some components. It should be around $100 Cheers from Utah, Loic -- -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat --- You received this message because you are subscribed to the Google Groups "R/C Tank Combat" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
