Hi everyone, just joined and have alot of reading to do! Have started building my 1/6th ish scale T34/85.Got a second hand rc system and my motors are two 24volt 350watt gear reduction model MY101.
If I may ask a few questions(prior to my searching the forum)? 1.Anyone sell motor controllers for variable speed operation? (would rather not go "maryland attack group control" with relays and stop/go control)but I would need a ready to use set up as my electronic skills are not the best 2.Anyone sell sprocket size #35- tooth drive sprockets to replace MY101 motors 9 tooth #410 sprocket? (worst case I can buy 2 #35,9 tooth 3/8" bore and take then to a machine shop for bore to be corrected and keyway cut. 3.How bad is it to install the motors end to end? i realize there is a small difference in rpms when you have one motor reversed compared to the other thanks in advance, -- -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat --- You received this message because you are subscribed to the Google Groups "R/C Tank Combat" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
