We used 9 talons with fans during first robotics. Only good things to say
about them.
On 2014-05-23 10:53 AM, "Joe Sommer" <[email protected]> wrote:

>
> Hetzer T010 used the following drive system during
> recent battles on May 18.
>
> two Makita drill motors
> two 12V 18Ah batteries wired in series (24V)
> two Talons - Coast (not Brake) setting, no cooling fans
> IMX-1 mixer
>
> Bad news - The Hetzer fried two original Talons (not SR) during the
> second sortie of the first battle (Defend the Town).  The IMX-1 was
> not damaged.
>
> Air temperature was not hot and the failure occurred early in the
> second sortie with about 20 minute break between sorties.
> Consequently, I do not believe that it was a thermal failure.
>
> The failure did occur while performing rapid reversal steering
> maneuvers in very tall grass.  The failure was probably due
> to impedance reversal spikes.
>
> Good news - It only required about 20 minutes to replace the dead
> Talons with two new Talon SRs.
>
> The new Talons SRs did not fry during the second battle (Fox and
> Hounds).
>
> Joe
>
>
>  --
> --
> You are currently subscribed to the "R/C Tank Combat" group.
> To post a message, send email to [email protected]
> To unsubscribe, send email to [email protected]
> Visit the group at http://groups.google.com/group/rctankcombat
>
> ---
> You received this message because you are subscribed to the Google Groups
> "R/C Tank Combat" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> For more options, visit https://groups.google.com/d/optout.
>

-- 
-- 
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to [email protected]
To unsubscribe, send email to [email protected]
Visit the group at http://groups.google.com/group/rctankcombat

--- 
You received this message because you are subscribed to the Google Groups "R/C 
Tank Combat" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to