Just looks like a simple v attachment. Attach the open end of the v to the gun carriage. Then, drill a hole in each end for the center of the turntable. Just need a bolt and a bushing then.. No welding required at then.
Tuesday, August 12, 2014 9:12:27 PM UTC-4, Caleb Smith wrote: > > Do you think the wheels will keep centered on the base without the piece > that goes from the gun frame to the turntable? That was the piece I > originally thought I was going to need the welder for. > On Tuesday, August 12, 2014 7:12:15 PM UTC-4, jvragu47 wrote: >> >> >> >> On Monday, August 11, 2014 7:00:27 PM UTC-4, Caleb Smith wrote: >>> >>> Why didn't I see that before! Looks simple enough to make. That little >>> frame might be a little more difficult to make. Might have to brake out >>> the welder... >>> >>> Or, for now how about this. Large piece of plywood base and then maybe a >>> 1/2" thick plywood circle in the center for the tires to roll around. No >>> welding required. >>> >> >> John P >> > -- -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat --- You received this message because you are subscribed to the Google Groups "R/C Tank Combat" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
