Usually, the door lock actuator is used for manual triggers, because it
pulls harder and faster than a servo by itself. When an e-trigger is
used, very little force is needed, so the door lock actuator is not
really needed. Nonetheless, any of the following configurations could
be used to activate a door lock actuator with proper wiring:
a) Servo & Mechanical Switch
b) Relay-based Servo Switch
c) FET-based Servo Switch
d) Prototype CCS Servo Switch (FET-based)
On 10/8/2014 3:53 PM, Mike Lyons wrote:
What's the interface between the R/C receiver (or equivalent e.g. C12C
plug plug plug) and the door lock thingamy?
--
--
You are currently subscribed to the "R/C Tank Combat" group.
To post a message, send email to [email protected]
To unsubscribe, send email to [email protected]
Visit the group at http://groups.google.com/group/rctankcombat
---
You received this message because you are subscribed to the Google Groups "R/C Tank Combat" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
