I figured that I would publish answers to questions that people email me here. That way the next person can benefit from it too.
I have access to three of these lasers. They are 80 watt machines. http://www.troteclaser.com/en-US/Laser-Machines/Mid-Size/Pages/Speedy300.aspx They can cut many materials, but not all. Acrylics and wood are the best options. The link has a list of lots of materials. 3/8" thick acrylic is about the thickest I have ever seen done. I have seen some 3/8" wood done too. The max I have ever cut was 1/4" MDF and that turned out really nice. Lexan (PolyCarbonate) can not be cut with the laser. It makes a toxic gas when cut and honestly does not have clean edge cuts anyway. Hope that is helpful. Josh -- -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat --- You received this message because you are subscribed to the Google Groups "R/C Tank Combat" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
