Back to building my tank-The steel belts was not working, so i have now printet a new track on my 3d printer: https://www.youtube.com/watch?v=D4WaRKr2D7k&feature=em-upload_owner
Den mandag den 3. juni 2013 kl. 23.13.26 UTC+2 skrev Niels Erik Kristensen: > > First testdrive-With a werry bad nokia phone kamera: > http://www.youtube.com/watch?v=yJlNC29xDcI > Now i will go flying RC planes for the sommer-And continiue my tank at the > winter agin > Den fredag den 26. april 2013 17.45.51 UTC+2 skrev Niels Erik Kristensen: > >> Now a littel chance in my plans for my tank!! The watercooling are out! >> The ESC`s that i want to use are not good enough, so now i will use ESC`s >> from cars-With reverse :-) >> The problem are that the Boat esc`s that i have, dont have propotional >> reverse funktion-They just give full trottel when i will go reverse-I can >> chance that down to 25% full trottel-But that are not sutabel for a tank. >> That "mal"funktion, cost me my first damage to my tank :-( In a motor >> test, outside, the tank sudently go full reverse in to the wall! But >> damage where small: the front aksel bent a littel (about 3 mm) I can fix >> that-No damage to the hull :-) and then the rear spocket, that are sitting >> on the rear main aksel, got loose. The spocket are secured to the aksel >> with 3 ps. of 5mm bolts, all countersunk about 2 mm into the aksel-They all >> got 2mm shorter!! I think there are alot of power in my motors. >> Den tirsdag den 23. april 2013 07.03.38 UTC+2 skrev Niels Erik Kristensen: >> >>> The motor mounts are not redy yet, they will have a top on too-With a >>> 60mm fan, for cooling. >>> The top are 6mm plywood, and i use epoxy to glue it on with. >>> Den tirsdag den 23. april 2013 04.33.58 UTC+2 skrev [email protected]: >>> >>>> Please don't take this as being critical because I think you are doing >>>> an excellent build. Just keep an eye on those motor mounts. They look a >>>> little weak. If they start to flex at all, you will want to make them >>>> stronger. Any flex will eventually lead to breaking. Had it happen to me >>>> in my M113 build. >>>> >>>> Derek >>>> >>>> >>>> On Mon, Apr 22, 2013 at 4:14 PM, Niels Erik Kristensen <[email protected]> >>>> wrote: >>>> >>>>> Update from Denmark!! I got my transmision redy, and 1 motor >>>>> running-I only got 1 ESC for the moment, the other one are delayed in >>>>> Chinise mail :-( >>>>> The ESC are not set right, at the moment, first i have to download the >>>>> manual-I forgot it today. >>>>> But one motor are running and are looking good so far. >>>>> http://www.youtube.com/watch?v=3AcCV3T5HVs&feature=youtu.be >>>>> http://www.youtube.com/watch?v=LWcgQg4f8wU&feature=youtu.be >>>>> Den tirsdag den 9. april 2013 13.18.53 UTC+2 skrev Bill Byrnes: >>>>> >>>>>> That section can be placed right next to the "What everyone expects >>>>>> from Neil" section. It will include all the criticisms we have of Neil >>>>>> (constructive of course). If necessary, we can expand that section onto >>>>>> another internet server if the present capacity limit is reached. >>>>>> >>>>>> Bill "Can hardly wait for my leader's instructions" B >>>>>> >>>>>> *From:* Neil Rochford <[email protected]> >>>>>> >>>>>> I might ask Frank to open a new section of the site called "What Neil >>>>>> expects" I have been spending large amounts of time teaching pre teenage >>>>>> tankers and as a consequence my manner maybe becoming somewhat >>>>>> condescending. Id like nothing more than to introduce such a regime to >>>>>> rctankcombat, whereas anyone lacking behind in construction, (in my >>>>>> opinion) will become my subject for criticism. obviously in a >>>>>> constructive manner, or some other manner of my choosing. >>>>>> Any message dated 28th January (or any other date) predicting FTF >>>>>> progress was merely a prediction and therefor can not fall within the >>>>>> rules >>>>>> stated above. >>>>>> >>>>>> Neil "Your leader has spoken you have two weeks" R >>>>>> >>>>>> >>>>>> >>>>>> On Monday, April 8, 2013 3:16:15 PM UTC-7, Niels Erik Kristensen >>>>>> wrote: >>>>>> >>>>>> Yes, and i have not forget what you wrote on januar 28!! >>>>>> But you dont now me-When i say that i will do somthing-Then consider >>>>>> it done :-) I especkt the motors to be in the tank, and running, in >>>>>> 2-4 >>>>>> weeks :-) >>>>>> >>>>>> Neil is pretty demanding.... :) Just kidding. >>>>>> >>>>>> Nice work. >>>>>> >>>>>> Derek >>>>>> >>>>>> >>>>>> -- >>>>>> -- >>>>>> You are currently subscribed to the "R/C Tank Combat" group. >>>>>> To post a message, send email to [email protected] >>>>>> To unsubscribe, send email to [email protected] >>>>>> Visit the group at http://groups.google.com/group/rctankcombat >>>>>> >>>>>> --- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "R/C Tank Combat" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to [email protected]. >>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>> -- >>>>> You are currently subscribed to the "R/C Tank Combat" group. >>>>> To post a message, send email to [email protected] >>>>> To unsubscribe, send email to [email protected] >>>>> Visit the group at http://groups.google.com/group/rctankcombat >>>>> >>>>> --- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "R/C Tank Combat" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>> >>>>> >>>>> >>>> >>>> -- -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat --- You received this message because you are subscribed to the Google Groups "R/C Tank Combat" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
