Caleb, Long ago, I designed and sold an RC interface for brushed scooter motor controllers using a PIC microprocessor. Unfortunately I no longer the have any boards or a PIC compiler/burner.
I will try to find my schematics and code to port to Arduino. Joe On Friday, January 5, 2018 at 10:28:46 AM UTC-5, Caleb Smith wrote: > > Hi everyone, I'm putting this out here to see if the community can help me > figure out how to control this scooter controller as easily as possible. > So I have two of these controllers I'd like to put into my Locust > > https://www.allelectronics.com/item/msc-250/250-watt-controller-for-brushless-motors/1.html > > <https://www.google.com/url?q=https%3A%2F%2Fwww.allelectronics.com%2Fitem%2Fmsc-250%2F250-watt-controller-for-brushless-motors%2F1.html&sa=D&sntz=1&usg=AFQjCNFuWvcfzlcXfdXZsJ4GBv0lyC_Uow> > They use a switch to control direction and a 10k pot to regulate speed. > I'm not sure how to go about making these RC controllable like a standard > etc. Two forms of control will be needed, one to move the pot to control > speed and one to control the switch for direction. How to go about doing > that in an effective manner that will allow full control has me a bit > stumped. I know Frank developed a fancy control board for the brushed > unidirectional controllers, but I don't know if it would work for these or > if they're even available anymore. > If you all could give some ideas I'd appreciate it. Hopefully I'll be able > to get the Locust running again soon. > Thanks, > Caleb -- -- You are currently subscribed to the "R/C Tank Combat" group. To post a message, send email to [email protected] To unsubscribe, send email to [email protected] Visit the group at http://groups.google.com/group/rctankcombat --- You received this message because you are subscribed to the Google Groups "R/C Tank Combat" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
