Bill -
Are you saying that we can now eliminate the DC disconnects from systems now as long as the PV module connectors require a tool to open and are marked "Do Not Disconnect Under Load" or "Not for Current Interrupting." Do the PV module connectors need to be readibly accessible? Or can they be located behind the PV modules? Would this require a roof top mounted AC disconnect withing sight of the inverter/modules? Christopher ------------------------------------ Christopher Freitas Director of Research and Development OutBack Power Systems, Inc. [EMAIL PROTECTED] Tel 360 435 6030 cell 360 202 4239 EMAIL CONFIDENTIALITY NOTICE: The preceding message (including attachments) is covered by the Electronic Communication Privacy Act, 18 U.S.C. sections 2510-2521, is confidential, and may also be protected by attorney-client or other privilege. If you believe that it has been sent to you in error, please do not read it. If you are not the intended recipient,you are hereby notified that any retention, dissemination, distribution, or copying of this communication is strictly prohibited. Please reply to the sender that you have received the message in error, then delete it. Thank you.
<<winmail.dat>>
_______________________________________________ List sponsored by Home Power magazine [email protected] http://lists.re-wrenches.org/listinfo.cgi/re-wrenches-re-wrenches.org List rules & etiquette: http://www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
