Any chance of getting power directly from the batteries back out to
the tracker? Then you could use Solar Converter's DC to DC unit. I
found the Wattsun trackers worked a lot better when powered from the
battery.
The evening reset to the east will get you noticeably more energy.
Ray
On Aug 25, 2008, at 8:47 PM, Todd Cory wrote:
Wrenches,
I am needing a 48 VDC to 24 VDC converter to power one of my home
system's tracker. The ones supplied by array technology are
suspect. The DC input voltage can go as high as 60 volts when
equalizing and the tracker control can take up to around 35 volts
or so. I believe I am needing around 5 amps of supply current. What
do folks recommend for this application?
Thanks,
_______________________________________________
List sponsored by Home Power magazine
[email protected]
http://lists.re-wrenches.org/listinfo.cgi/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
R. Walters
Solarray.com
NABCEP # 04170442
_______________________________________________
List sponsored by Home Power magazine
[email protected]
http://lists.re-wrenches.org/listinfo.cgi/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
