Hi Folks,
We are considering investing in the Rennsteig Crimper for MC type 3 &
4 (Solarline 1 & 2) and Tyco connectors that AEE sells.
But, I've lost track of what the evolution is to be on quick connects
with the new standards.
What is the connector standard that is to be used with the
Double-Insulated cable? Is it yet another standard other than
these? What tool is needed for that or will Rennsteig have a die
for that too?
What's the status of panel manufacturers in bringing in
double-insulated? Early next year?
Please clear my confusion if you will my fellow Wrenches!
Thanks!
Jeff
--
~~~~~~~~~~~~~
Jeff Clearwater
Senior Design Engineer
NABCEP (tm) Certified Solar PV Installer
http://www.nabcep.org/
NorthEast Solar Design/Village Power Design
Turnkey Solar Design & Installation for the Commercial Sector
http://www.villagepower.com
[EMAIL PROTECTED]
Voice: 413-259-3750
Fax: 413-825-0703
65 Schoolhouse Rd
Amherst, MA 01002
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
