We can help you. Just contact our application department. Or visit our website.
Chris Meier Product Manager UniRac, Inc. 1411 Broadway Blvd. NE Albuquerque, NM 87102-1545 Ph: 505-242-6411 Fx: 505-242-6412 Email: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> Web: http://www.unirac.com <http://www.unirac.com/> This message contains confidential and privileged information, which is intended for the individual(s) to whom it is addressed. It should not be reviewed, retransmitted, disseminated, or otherwise used by a person(s) or entities other than the intended recipient. If you received this message in error, please contact the sender and delete the material from your computer system(s). ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of North Texas Renewable Energy Inc Sent: Thursday, October 09, 2008 4:39 PM To: RE Wrenches Subject: [RE-wrenches] Tilted arrays for flat roofs Wrenches are their any new manufacturers of flat roof mounting systems for tilted arrays of 15 degrees or greater? The Pro-solar solar wedge is about the tallest stationary mount I've seen. In this application, lag bolts are OK. tanks Jim Duncan North Texas Renewable Energy Inc 4029 Aragon Drive Fort Worth, Texas 76133 817.917.0527 [EMAIL PROTECTED] Serving North Texas since 1994. For more information www.ntrei.com References? http://www.findsolar.com/
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
