Hi Larry,
I suggest you get a 12v fan, make it easy.
jay
peltz power
On Nov 7, 2008, at 1:29 PM, Larry Brown wrote:
Wrenches.
On an upgrade to an existing system, we just installed a Xantrex
XW6048 inverter. We have a 48 volt dc battery box vent fan that we
used to run through the relay on the old SW5548. The XW6048 has a
12 vdc aux output so I assume we need to install a relay to run the
fan, 12vdc input, that will allow 48 vdc output
Any suggestions on what relay to use?
Thanks
Larry Brown
Sun Mountain
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
