Todd Cory Hi Folks,
It's been a long time but when I called in to what was then Trace, the answer I got for cracked spill containment trays was to use green toy army soldiers, like would be in your kid's toy box, to melt and bridge the crack. It worked. However, the trays should not have cracked. Bill Loesch Solar 1 - Saint Louis Solar 314 631 1094 ----- Original Message ----- From: Christopher Freitas To: RE-wrenches Sent: Saturday, December 13, 2008 12:39 PM Subject: Re: [RE-wrenches] PSR SCT Hey Todd ? The company we used to make the spill containment trays has been having severe delivery and quality problems for a long time and we unfortunately had to just drop the product. We had a lot of problems with the plastic being too fragile due to the thin wall thickness used. It needs a complete redesign and possibly different material. My favorite solution is to use before we offered the spill containment trays was using EPDM type rubber pond liner sheet and just folding the corners (sort of like wrapping a Christmas presents) inside of the enclosure. The upper edges can be screwed or stapled to the sides to keep it from sliding down ? although if the liner is heavy enough its not really an issue. I hope this helps! Christopher Christopher Freitas Director of Research and Development OutBack Power Systems, Inc. cfrei...@outbackpower.com Tel 360 435 6030 Cell 360 202 4239 19009 62nd Ave NE Arlington WA 98223 USA www.outbackpower.com ------------------------------------------------------------------------------ From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of Todd Cory Sent: Saturday, December 13, 2008 10:17 AM To: re-wrenches@lists.re-wrenches.org Subject: [RE-wrenches] PSR SCT I was just informed I can no longer get the Outback PSR-SCT (spill containment tray). What are others using in their battery boxes for spill containment? Todd -- Todd Cory KE6SXS toddc...@finestplanet.com Mt. Shasta Energy Services License C-10 #811428 P.O. Box 689 Mt. Shasta, CA. 96067 (530) 926-1079 “I'd put my money on solar energy...I hope we don't have to wait till oil and coal run out before we tackle that." ∞ Thomas Edison, in conversation with Henry Ford and Harvey Firestone, March 1931 MESSAGE CONFIDENTIALITY NOTICE: This message (including attachments) is covered by the Electronic Communication Privacy Act, 18 U.S.C. sections 2510-2521, is confidential, and may also be protected by attorney-client or other privilege. If you believe that it has been sent to you in error, please do not read it. If you are not the intended recipient,you are hereby notified that any retention, dissemination, distribution, or copying of this communication is strictly prohibited. Please reply to the sender that you have received the message in error, then delete it. Thank you. ------------------------------------------------------------------------------_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org ------------------------------------------------------------------------------No virus found in this incoming message. Checked by AVG. Version: 7.5.552 / Virus Database: 270.9.18/1848 - Release Date: 12/14/2008 12:28 PM
_______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org