Does anyone know where I can get some Xantrex (Trace) RC-7 orRC-7GS
remote controls for the RV series inverters? New, used or refurbs OK.
Thanks,
Larry Crutcher
Starlight Solar
11279 S. Glenwood Ave #11114
Yuma, AZ 85367
(928) 941-1660
[email protected]
www.starlightsolar.com
Retail Store: 2998 Shari, Yuma, AZ
Renewable Energy Products, Service and Installation
On Jan 6, 2009, at 11:39 AM, Drake Chamberlin wrote:
Hello Wrenches,
Where is the requirement that states that modules need to be
grounded by means of Weeb clips, or grounded by wires connected to
the modules? Reviewing the code, I can't find the requirement in
Section in 690.
If the issue is that the anodized aluminum frame can build up a
coating, therefore must have additional grounding that penetrates
that coating, it seems that star washers should be effective. In a
typical setup, a lug might be bolted to a module, with a star washer
between the frame and the lug. How is this going to be more
effective than having two modules bolted together with a star washer
between?
Is this a UL requirement?
Thanks,
Drake
Drake Chamberlin
Athens Electric
OH License 44810
CO License 3773
740-448-7328
740-856-9648
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
