Or the simple solution, turn it into a polyline and increase its width. Jim ----- Original Message ----- From: William Miller To: RE-wrenches Sent: Saturday, February 07, 2009 4:12 PM Subject: [RE-wrenches] Cad to PDF problem
Friends: I am having problems printing CAD drawings to a pdf. My lines are very thin and faint. Has anyone else experienced this? Got any ideas??? Thanks in advance. William Miller PS: Adobe Pro has a hairline fix tool -- does the job but adds a step. Looking for something automatic. Wm Please note new e-mail address and domain: William Miller Miller Solar Voice :805-438-5600 Fax: 805-438-4607 email: [email protected] http://millersolar.com License No. C-10-773985 ------------------------------------------------------------------------------ _______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
