Hey Jay we have used epoxy in the past, drill hole, clean, fill w/ E, put SS threaded rod in hole & there ya go! ( all the feet at the hi school) you will probably need to talk to a PE if your getting a permit, but it works great. Contact Chris of me off list FMI TUMP
-----Original Message----- From: re-wrenches-boun...@lists.re-wrenches.org [mailto:re-wrenches-boun...@lists.re-wrenches.org] On Behalf Of jay peltz Sent: Tuesday, February 10, 2009 8:35 PM To: RE-wrenches Subject: [RE-wrenches] anchoring racks to concrete roof I've got a client with a foam core concrete covered roof. the concrete is 2.5" thick + over metal mesh over 6" ridged foam and then the same on the inside. What anchor choices are best to mount the feet to? Thanks in advance jay peltz power _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org _______________________________________________ List sponsored by Home Power magazine List Address: RE-wrenches@lists.re-wrenches.org Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
