William, Midnite makes an E-Panel for the SW series. I have used one for a "make a Rev. 1.0 SW4024 system with no disconnects into a modern system" job last year. It worked fine, but I would definitely order the stretched version next time with the 4/0 cable. Contact me off-list if you would like a photo of the installation. You still need the SW DCCB. Allan at PosE -----Original Message-----
Friends: I can't belive it, but we keep getting hired to rewire SW inverter systems. I guess this speaks to the reliability of the unit. We find either there are no BOS components or there is a typically overcrowded DC250. We used to automatically specify an Outback PS4 system (http://millersolar.com/Portfolio/Rework/rework.html). Now that the green components are all gone, we are at a dilemma. Has anyone modified a Flexware 1000 system to accommodate one or two SW inverters? It seems you could nibble the proper opening and fit it to the SW inverters. I even retained a couple of the removable plates.. Outback, could you consider restoring the SW openings in the boxes? I see us recycling SW inverters for years to come. William Miller
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
