Bill, Here are the still evolving California guidelines (not regulations). http://osfm.fire.ca.gov/training/photovoltaics.php
Joel Davidson ----- Original Message ----- From: bill roush To: RE-wrenches Sent: Saturday, February 14, 2009 2:22 PM Subject: [RE-wrenches] Rooftop PV setbacks? For rooftop PV systems, are there any regulations or rules of thumb on how much of a setback from the roof edge is needed? How about how wide of an isle way is needed between rows (if different than shading requirements)? Any requirement to "split rows" to allow for a path? -- Best, Bill Roush Heartland Solar Energy Industries Association www.hseia.org ------------------------------------------------------------------------------ _______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
