For copper SS roofs S-5 has the brass clamps to prevent the metal mis-match will not effect it. Conergy has them.
On Thu, Feb 19, 2009 at 12:04 PM, Carl Adams <[email protected]> wrote: > Wrenches, > > I'm bidding a job where I have a copper standing seam metal roof. I'm > thinking stainless steel S5 clips for attachment. Has anyone sourced > these and if so can you provide contact info? > > Regards > Carl Adams > NABCEP Certified PV Installer > SunRock Solar LLC > _______________________________________________ > List sponsored by Home Power magazine > > List Address: [email protected] > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > -- Jason Lombard Open Hand Solar LLC. Certified Sustainable Building Adviser www.openhandsolar.com 505 795 8646 "I'd put my money on solar energy… I hope we don't have to wait 'til oil and coal run out before we tackle that." —Thomas Edison
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
