Wrenches,
Has anyone had a problem with the control boards on Staber washing
machines?
We have had 3 control boards fail in a relatively short time frame on
the same machine
Staber has replaced the boards each time
The last one was after completing a load of laundry and then starting
a second load twenty minutes later and having the brand new, just
installed replacement control board fail again
This is a dedicated washing machine outlet with additional surge
protection
No other motors or electronics have experienced any problems
This house has a grid-tied system with a Xantrex 2.8 kw inverter
All failures have been in the morning around 9-10 am
Any ideas or recommendations?
Thanks
Larry Brown
Sun Mountain
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches@lists.re-wrenches.org
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
