Hi Greg,
We use this tool & on the first page where you setup a new report, you can specify the 'surface tilt settings' and override the Latitude default. You can create a full report, then 'edit report' and change the tilt to run other scenarios. HTH -Glenn Burt From: [email protected] [mailto:[email protected]] On Behalf Of Greg Egan Sent: Sunday, June 14, 2009 8:50 PM To: [email protected] Subject: [RE-wrenches] Solar Pathfinder data manipulation Hi all, I'm doing a few Solar Site Survey Reports using the Solar Pathfinder Assistant 4.0 Software. We get snow and it sticks to modules so we need to be able to model the arrays at 85 or 90 degrees during the likely snowy months and closer to 50 degrees during the other months. I was hoping a) that the SP software would allow me to do this or b) it would allow me to export the data tables into ms excel so I can do it myself. I can't seem to figure out a way to get it to let me do either. I can't believe I'm the only wrench in North America that has tried to do this. Anyone out there already done this successfully or know of another program that I can buy to get it done? I can just retype all the data into excel every time I do a report but that seems a slow way to do it and invites typing errors into the data set. Thanks in advance, Greg Egan NABCEP Certified PV Installer & Licensed Electrician Remote Power Inc. 981 Gold Mine Trail Fairbanks, AK 99712 P. 907.457.4299 U.S.Distributor for Outback Power Systems and other premium power equipment.
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
