All of the controllers that Pulse / Connect ever produced (even back to the APT 
days) had some sort of method of adjusting the Bulk, Float, and Eq charge 
levels. The circuit board should have anywhere from 2 - 10 adjustment pots 
(depending on model) as well as an identifier to signify the model (PM60, 
PC250, PC500, etc..).
 
Unfortunately, the process is not straight forward I no longer remember the 
process, or have access to any of the manuals. If you can not find them from 
somewhere on this list, there is one other option you might try. Bill Barnickol 
was the person who has been repairing / servicing these boards up until they 
got out of the cc business, and he may still have a copy of the manual or 
knowledge of the procedure. Bill lives in Grass Valley, CA off Lower Colfax 
Highway, you might try doing a local search for the area of Grass Valley on his 
last name and find his contact info if required.
 
(my apologies for what ever the attachment is that my e-mail program creates 
for my signature)
 
Good Luck
 
Brian C. White
Sr. Design Engineer - PV System
 
Eagle Roofing Products
120 North Auburn Street - Suite 212
Grass Valley, CA  95945
Phone: 530-273-2948
Cell: 530-575-5550
e-mail: [email protected] <mailto:[email protected]> 
 
 

________________________________

From: [email protected] on behalf of Dana
Sent: Tue 7/14/2009 1:56 PM
To: 'RE-wrenches'
Subject: Re: [RE-wrenches] Pulse Power CC



Does it have  a charge controller card mounted in the door?

 

Dana Orzel

 

Great Solar Works, Inc

www.solarwork.com

E - [email protected]

V - 970.626.5253

F - 970.626.4140

C - 970.209.4076

"I'd put my money on solar energy... I hope we don't have to wait 'til oil and 
coal run out before we tackle that."

-Thomas Edison, in conversation with Henry Ford and Harvey Firestone, March 1931

 

From: [email protected] 
[mailto:[email protected]] On Behalf Of Drake Chamberlin
Sent: Tuesday, July 14, 2009 8:05 AM
To: RE-wrenches
Subject: [RE-wrenches] Pulse Power CC

 



Is there any way to adjust the voltage on the charge control of a Pulse Power 
Center? 




Drake Chamberlin
Athens Electric
OH License 44810
CO License 3773
NABCEP TM  Certified PV Installer 
Office - 740-448-7328
Mobile - 740-856-9648 

_______________________________________________
List sponsored by Home Power magazine

List Address: [email protected]

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to