install time was A BIT better, layout took some time & as usual the tying up
of cables is what takes the longest. What really sucks is the wait time
between selling them then not being able to get them. They say this will
soon be a thing of the past....... still waiting. That being said the folks
at Enphase are quite helpful.
I'm not sure about the inverters rated performance according to the CEC.
<mailto:[email protected]> [email protected] <http://www.swnl.net/>
www.SWNL.net
Solarwinds Northernlights
Serving Mid Coast Maine & Northern California
Me.# 207-832-7574 Cl.# 610-517-8401
Blair "TUMP" May
******** MAINE'S CHARTER ********
NABCEP "Certified PV Installer"
******** MAINE'S CHARTER ********
Trace Xantrex "Certified" Dealer / Installer"
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Marco
Mangelsdorf
Sent: Wednesday, July 22, 2009 12:31 AM
To: 'RE-wrenches'
Subject: [RE-wrenches] Enphase comparison
To those of you who have installed PV systems in, say, the 2-4 kW range
using Enphase inverters, how would you compare the labor time and
installation materials (wire, conduit, hardware, etc.) to a standard system
design using a single inverter?
Longer? Shorter? More or less materials? If either, by what percentage?
Thanks,
Marco
ProVision
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
