Wrenches:

I have a patent pending on a device that is specifically for lifting solar panels. Panels can not blow off of this device. We am pursuing a manufacturing arrangement. I can't say any more about it at this time, but I will share more as soon as possible.

We will be looking for West Coast and Southwest contractors to do some beta testing. The concept is best used for two story and industrial buildings. Contact me off list if you want to try one out.

William Miller




At 12:29 PM 8/12/2009, you wrote:
Check out: http://www.tranzsporter.com/lh400.html

I've used one of these for about two years now - I think it cost about
$1,400 for the electric motor version 28' tall, 200 lb. capacity. Once
you've done it a few times it takes about 15 minutes to assemble on site.

Kirk Herander
Vermont Solar Engineering
802.863.1202
NABCEP(tm) Certified Solar Installer
NYSERDA-eligible Installer
VT Solar Incentive Program Partner
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Geoff
Greenfield
Sent: Tuesday, August 11, 2009 4:07 PM
To: 'RE Marketing for home scale RE industry'; 'RE-wrenches'
Subject: [RE-wrenches] solar roof lift experience?

Hey gang-  anyone have any success (or horror) stories with regard to
panel lifting equipment?  I have considered a home-brew cart on a ladder,
looked at some products made for comp shingles, and saw some
fancy-schmancy European stuff at the shows.  Just today I was hit with a
marketing email from this company:

Check us out at:  <http://www.boeckeramericas.com/> BoeckerUSA.com

Anyone been down this road?

For a brighter energy future,

Geoff Greenfield
President

Third Sun Solar & Wind Power Ltd.
340 West State street, Unit 25
Athens, Ohio 45701
(740) 597-3111   fax: (740)597-1548
www.third-sun.com

Clean Energy - Expertly Installed

_______________________________________________
List sponsored by Home Power magazine

List Address: [email protected]

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org


_______________________________________________
List sponsored by Home Power magazine

List Address: [email protected]

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.52/2298 - Release Date: 08/12/09 06:09:00

Please note new e-mail address and domain:

William Miller
Miller Solar
Voice :805-438-5600     Fax: 805-438-4607
email: [email protected]
http://millersolar.com
License No. C-10-773985
_______________________________________________
List sponsored by Home Power magazine

List Address: [email protected]

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to