check the specs on how the roof is attached to the building.....
________________________________
From: Paul Lyons <[email protected]>
To: [email protected]
Sent: Wednesday, August 26, 2009 3:32:17 PM
Subject: [RE-wrenches] S-5 clamps on the standing seam roof
Hello RE-Wrenches –
We are working on the design details for S-5 clamps on a standing
seam roof with the PV modules mounted directly on the clamps at four points
(i.e. no horizontal rails). The roof is made by Metl Span of Lewisville,
Texas. The building is in New England and the roof has a slope of 0.5:12
Have any of you had experience with these clamps and/or this
particular roof manufacturer?
Paul Lyons, P.E.
Zapotec Energy Inc.
675 Massachusetts Ave
Cambridge, MA 02139-3309
Tel: 617-547-5900 ext.201
Fax: 617-547-5901
Mobile: 617-285-0634
Email: [email protected]
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
