They use imported cells and laminate and assmble in Canada.
Ezra Auerbach
On 2009-10-28, at 9:52 PM, Nick Vida <[email protected]> wrote:
they are here at solar power.
its cool technology, they have a mesh on the top of the panels
instead of traditional solder lines. This reduces resistance so they
get better efficiency. They also flash test each panel so you can
sort the for mismatch before installing. Yes they are made in
Canada, although I don't remember to what level (all the way to
foundry? i dont know). They said they are looking for distributors/
dealers so call them.
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
