How are folks wiring the Soladeck boxes?I have been wanting to use external mounted threaded MC connectors but cannot find them in stock anywhere. [See below] Having the MC connectors would make attachment a piece of cake. So instead I use one 1/2" NM flex per string which will allow module conductors to terminate in DIN rail terminal blocks. http://www.alliedelec.com/Images/Products/Datasheets/BM/ALTECH_CORP/502-3746.PDF The internal jumpers will connect the separate strings terminal block, a much more positive connection than the standard external jumper with the old style 14-6 AWG lug. Those lugs are usually a poor fit on the smaller gauge wires.
Me, I'm taking Thursday off....
Jim Duncan North Texas Renewable Energy Inc 817.917.0527 [email protected] www.ntrei.com
<<attachment: MC.jpg>>
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
