The Vmp of those is 33.7 volts, so what you might want to do is just come up 
with a set of panels that would equal 10 of the SX120's within 5% or less. As I 
recall, the SX120's had a rather poor temperature coefficient compared to 
todays panels, so that might be hard to match up.


..................................................................................................
Northern Arizona Wind & Sun - Electricity From The Sun Since 1979
Solar Discussion Forum: http://www.wind-sun.com/ForumVB/
..................................................................................................
  ----- Original Message ----- 
  From: Allan Sindelar 
  To: RE-wrenches 
  Sent: Thursday, February 18, 2010 8:07 AM
  Subject: [RE-wrenches] Grid-Tie Upgrade Problem


  Fellow Wrenches,
  One of our first batteryless grid-tied installations needs an upgrade and I 
need to ask this list for suggestions re how it might be done.

  In late 2001 we installed two poles in the ground at a home. On one pole we 
mounted ten BP SX120s on a dual-axis Wattsun tracker. Input fed an SMA SB2500 
inverter. The idea was that we would install 1/2 of the system then (what the 
customer could afford), with the infrastructure in place to add a second 
tracked array later. The system has worked flawlessly since then.

  Nine years (!) later the customer wants to add to the system, and I'd like to 
use the original approach if at all possible. We can fit up to around 1500 
watts onto the existing inverter, but it must be in the form of ten 72-cell 
modules of similar Vmp, temperature deration coefficient, and fill factor. I am 
imagining ten 150W 24Vnom polycrystalline modules, but I don't know of any 
currently made. 

  I thought it would be easy - ten Kyocera KC130s or KD135s, until a coworker 
pointed out that these are 12V modules - duh...

  Any suggested solutions out there?

  Thank you,
  Allan

  -- 
  <![endif]--> 
  Allan Sindelar
  [email protected]
  NABCEP Certified Photovoltaic Installer
  EE98J Journeyman Electrician
  Positive Energy, Inc.
  3201 Calle Marie
  Santa Fe, New Mexico 87507
  505 424-1112
  www.positiveenergysolar.com



------------------------------------------------------------------------------


  _______________________________________________
  List sponsored by Home Power magazine

  List Address: [email protected]

  Options & settings:
  http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

  List-Archive: 
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

  List rules & etiquette:
  www.re-wrenches.org/etiquette.htm

  Check out participant bios:
  www.members.re-wrenches.org

_______________________________________________
List sponsored by Home Power magazine

List Address: [email protected]

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to