Thanks Drake.
The original article was called Wire Sizing and Voltage Drop in Low
Voltage Power Systems". It was in two parts, in HP issues #13 and 14.
On Feb 21, 2010, at 9:32 AM, Drake Chamberlin wrote:
The Home Power Mag version of this went in my notebook when it first
came out, and a copy still goes with me. It is very useful.
At 04:05 PM 2/20/2010, you wrote:
Marco,
Here's another method that you can print to a sheet of paper. I
published this in Home Power in 1989 and it's been widely used ever
since. So it's an unusual approach, but proven to be consistent
with published charts regardless of voltage. It applies to DC and
"simple" AC as you'll see.
http://www.conergy.us/PortalData/3/Resources/products/solar_pumps/pdf/wire_sizing_chart.pdf
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
