Allen,
Exactly what happens? Does the inverter connect but no charge? If so then Diodes D3, D4, D5 and D6 are the problem... They are IN 4147 diodes, you used to be able to buy packs of two from radio shack for about 2 bucks... I'm currently in Kenya, so getting a hold of me via phone is a bit touchy... Steve Higgins. Sr Application Engineer. Sub-Saharan Africa Business Dev Mgr. Outback Power Systems. 19009 62nd Ave Ne Arlington Wa 98223 360-618-4313 From: [email protected] [mailto:[email protected]] On Behalf Of Allan Sindelar Sent: Monday, March 08, 2010 10:46 AM To: RE-wrenches Subject: [RE-wrenches] SW Control Board Request Wrenches, I need to replace a failed control board on a 1998 Rev. 4.01 SW4024. The inverter continues to function properly as an inverter but is unable to charge from a generator. Our local Trace/Xantrex/Schneider service center has them but won't allow sale of just the board. I can arrange to have the inverter removed/taken/repaired/returned/reinstalled/reprogrammed, but all of us who have done this know the hassle and expense involved. According to tech support, the board could otherwise be easily replaced without removing the inverter from the wall. Can anyone suggest a source for a new or good used board? Thank you, Allan -- Allan Sindelar [email protected] <mailto:[email protected]> NABCEP Certified Photovoltaic Installer EE98J Journeyman Electrician Positive Energy, Inc. 3201 Calle Marie Santa Fe, New Mexico 87507 505 424-1112 www.positiveenergysolar.com <http://www.positiveenergysolar.com/> MESSAGE CONFIDENTIALITY NOTICE: This message (including attachments) is covered by the Electronic Communication Privacy Act, 18 U.S.C. sections 2510-2521, is confidential, and may also be protected by attorney-client or other privilege. If you believe that it has been sent to you in error, please do not read it. If you are not the intended recipient,you are hereby notified that any retention, dissemination, distribution, or copying of this communication is strictly prohibited. Please reply to the sender that you have received the message in error, then delete it. Thank you.
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
