The US-64's were on their site for 3+ years after they discontinued them. They don't keep it updated very well.
I believe the main reasons the peel and stick were discontinued was high failure rates, high temperature losses (due to very little heat/air dissapation), and the difficulties in removing and replacing bad panels. Cost was also a factor - on the order of $8-10 per watt. .................................................................................................. Northern Arizona Wind & Sun - Electricity From The Sun Since 1979 Solar Discussion Forum: http://www.wind-sun.com/ForumVB/ .................................................................................................. ----- Original Message ----- From: Drake Chamberlin To: RE-wrenches Sent: Sunday, March 21, 2010 8:13 AM Subject: Re: [RE-wrenches] Peel-n-stick Uni-Solar: were these ever made in 5' length? At 11:02 AM 3/20/2010, you wrote: the whole peel-n-stick product line seems to be no more. Is that right? They still have them on their web site. http://www.uni-solar.com/uploadedFiles/PVL-136EN%28AA4-3697-04%29.pdf Drake Chamberlin Athens Electric OH License 44810 CO License 3773 NABCEP TM Certified PV Installer Office - 740-448-7328 Mobile - 740-856-9648 ------------------------------------------------------------------------------ _______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
