What is the documentation for 10% module voltage degradation? I have
heard different ideas on what will degrade over how much time. For
direct grid tie, I shoot for a voltage drop 1% maximum on the DC side.
Thanks,
Drake
At 11:08 AM 4/8/2010, you wrote:
I usually keep in mind that the modules will degrade by
10% However, if you are one of those wrenches promoting 3% DC
Voltage Drops, maybe you should add some more.
Nick Soleil
Project Manager
Advanced Alternative Energy Solutions, LLC
PO Box 657
Petaluma, CA 94953
Cell: 707-321-2937
Office: 707-789-9537
Fax: 707-769-9037
From: Drake Chamberlin <[email protected]>
To: [email protected]
Sent: Tue, April 6, 2010 1:58:56 AM
Subject: [RE-wrenches] Voltage degradation
Esteemed Wrenches,
How much voltage overhead should we have available on our arrays to
allow for inverters not to fall out of their DC voltage operating
range? Since the module power degradation is 20% over the warranty
period, I usually shoot for a module voltage that can drop 20% and
still be within the MPPT range of the inverter under the average
high temperatures, since most of the degradation is in voltage.
Am I being too conservative with this number? It always pushes the
number of modules to the top of what is allowable on the string for
the extreme low.
Thanks,
Drake Chamberlin
Athens Electric
OH License 44810
CO License 3773
NABCEP TM Certified PV Installer
Office - 740-448-7328
Mobile - 740-856-9648
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
Drake Chamberlin
Athens Electric
OH License 44810
CO License 3773
NABCEP TM Certified PV Installer
Office - 740-448-7328
Mobile - 740-856-9648
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
