I bought the Amprobe DGC-1000A. I paid around $1000, but I see they've gone up a bit already. I can't necessarily recommend (or berate) the web biz I bought it from, so I'm not going to give them a plug. I'd just google: the make & model #. The Amprobe is very easy to use, but the 2 down sides are: 1) It cannot be used for off grid systems, as it depends on the grid for its reference. 2) It can be hard to get the jaws in tight spots, so you need about 2" of exposed ground rod or wire, with 2" of clearance in a radius around it. (another reason to leave the ground rod sticking out of the ground a few inches)
R. Walters [email protected] Solar Engineer On Apr 17, 2010, at 9:09 PM, Jason Lerner wrote: > Hey Ray, > > Just saw your post on the wrenches list about the clamp on ground impedance > tester. > > Any chance you could provide model #, pricing and where you got it? That > sounds like just the ticket. > > Thanks very much, > > Jason Lerner > Waldron Power and Light Co. > (360) 588-6194 > > > > _______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
