A dual system will need two meters... one to keep track of each leg. Outback has details on their web page about how to configure these, or if you like contact me off list for repostings of messages from the last few times this went around.
Todd On Wednesday, April 21, 2010 10:08am, "Dana" <[email protected]> said: > Hello all, > > We have a client that we just revived their Dual SW4048 grid > interactive with the GIT configuration boxes. > This setup feeds a utility meter and a dedicated loads panel and works > well. > > Our client would like to know- > 1- How much power he is using through the dedicated panel. > 2 - How much he is back feeding the utility. > > Any suggestions are appreciated. > > Thanks, Dana Orzel > > Great Solar Works, Inc > web - www.solarwork.com > E - [email protected] > V - 970.626.5253 > F - 970.626.4140 > C - 970.209.4076 > > "We have been slow to give up on the myth of the Earth's generosity. > Rather grandly, we have overdrawn our accounts." > Barbara Kingsolver - Water is life. > > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: [email protected] > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > >
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
