Can anyone give me the NEC reference for taping UL-listed wire splice connectors (indoors)? Does the tape need to be UL listed? Anything else that pertains? - Peter Peter T. Parrish, Ph.D., President California Solar Engineering, Inc. 820 Cynthia Ave., Los Angeles, CA 90065 CA Lic. 854779, NABCEP Cert. 031806-26 [email protected] Ph 323-258-8883, Mobile 323-839-6108, Fax 323-258-8885
_____ From: [email protected] [mailto:[email protected]] On Behalf Of William Miller Sent: Friday, April 23, 2010 11:26 PM To: RE-wrenches Subject: [RE-wrenches] Inter-row shading, additional information Friends: I was incorrect on one point in my previous post on the subject. The SolarWorld SW230 is comprised of one series string of cells. It acts somewhat like there are three strings because of the bypass diodes. If you shade one cell of one group, the bypass diodes kick in and allow the module to continue to produce power but at a reduced level. Our test showed that if the short edge is shaded for more than half of a cell width on the narrow edge, the total output caved. The same shading on the long edge reduced output minimally. William Miller Please note new e-mail address and domain: William Miller Miller Solar Voice :805-438-5600 email: [email protected] http://millersolar.com <http://millersolar.com/> License No. C-10-773985
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
