Greg, not sure about the direct grid inverters, but i do know that the Enphase 
M190's are rated from -40˚C to +65˚C.Benn

DayStar Renewable Energy Inc. [email protected] HAVE A SUNNY DAY



CONFIDENTIALITY NOTICE:    This email, including any attachments, contains 
information from DayStar Renewable Energy Inc. and/or its affiliates, which may 
be confidential or privileged. The information is intended to be for the use of 
the individual or entity named above. If you are not the intended recipient, be 
aware that any disclosure, copying, distribution or use of the contents of this 
information is prohibited. If you have received this email in error, please 
notify the sender immediately by "reply to sender only" message and destroy all 
electronic and hard copies of the communication, including attachments.



Date: Mon, 26 Apr 2010 11:53:32 -0800
From: [email protected]
To: [email protected]
Subject: [RE-wrenches] direct grid micro inverters?








Wrenches,



I was wondering if anyone has any experience with this company and/or
it's products.  We have a client looking to put in a bunch of modules. 
I don't believe the other micro inverter companies warrant their
inverters down to -40 so these guys have got my attention.



Thanks!



Greg

NABCEP certified PV installer


-- 
Greg Egan

Remote Power Inc.
981 Gold Mine Trail
Fairbanks, AK 99712
P. 907.457.4299

U.S.Distributor for Outback Power Systems and other premium power equipment.    
                                  
_________________________________________________________________
Hotmail & Messenger are available on your phone. Try now.
http://go.microsoft.com/?linkid=9724461
_______________________________________________
List sponsored by Home Power magazine

List Address: [email protected]

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

Reply via email to