We have been there, and are doing the discharges and EQ's. Actually you have to be in float to get the eq to come on but your procedure might work, never tried it that early in the charge process.
Thanks, Bob From: [email protected] [mailto:[email protected]] On Behalf Of Jeff Oldham Sent: Tuesday, June 29, 2010 3:04 PM To: [email protected] Subject: Re: [RE-wrenches] Interstate UL-16 HC problem IMHO Interstate makes a decent battery. It sounds like to me that you are not Equalizing but just trying to BULK. You'll need at least one robust EQ cycle to bring the SG's in line and likely 2-3 a couple of days apart. At least the Magnum's of a couple of years ago are not intuitive to get into EQ, as I recall you need to 1st be in BULK charging before it can be set to EQ and this is/was done by holding down the "Charger" button until it moves into EQ. Wrenches please correct my fading memory if this is not correct. I would get the V to 62-63 and hold it there for 3-4 hours and then recheck your SG and see if further EQ's are in order. Good luck! -jeff o >From the Solar, Wind and Hydro powered office of Jeff Oldham/Regenerative SOLutions ____________________________________________________________ <http://thirdpartyoffers.juno.com/TGL3132/4c2a4411d2a3be9b2ast01vuc> Penny Stock Jumping 2000% Sign up to the #1 voted penny stock newsletter for free today! <http://thirdpartyoffers.juno.com/TGL3132/4c2a4411d2a3be9b2ast01vuc> AwesomePennyStocks.com
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
