S-5 also makes a bracket called a CorruBracket. Made from AL and has edpm seals.
Thank you, Maverick Maverick Brown BSEET, NABCEP Certified Solar PV Installer ® President & CEO Maverick Solar Enterprises, Inc. Office: 512-919-4493 Cell: 512-460-9825 Sent from an iPhone. On Aug 7, 2010, at 9:19 PM, "Jeff Yago" <[email protected]> wrote: > > Most of the past metal roof projects we have completed worked great with S-5! > clamps. However, we have a boat load of modules to mount on a large > commercial sloped metal roof that has no standing seams. The corrigations > are constant across the roof surface so there are no flat lands where we > could place a racking foot. > > Due to the large array size and weight, we will need to bolt through to the > metal truss below, but any standard foot would just squash down the roofing > when we tighten the bolts. I have seen homemade blocks used and saw an > Australian manufacturer called ALzone that has the exact product we need, > but I do not understand why this same mounting foot is not available from the > likes of UniRac or other U.S. manufacturers. I also would like to order local > and am not sure if the Alzone hardware has a local distributor. > > Doesn't anybody make a aluminum plate that is flat on top, has a corrigated > bottom surface, is about 6" to 8" sq to distribute the weight across several > "humps", and has some type of mastic sheet you can place under it to seal. > We don't want to get into making our own as we will be required to submit all > kinds of wind loading design data, so we just want to order this as a > completed product from somebody who can provide wind data on tests of their > product. > > Any help would be appreciated, > > Jeff Yago > > _____________________________________________________________ > Netscape. Just the Net You Need. > _______________________________________________ > List sponsored by Home Power magazine > > List Address: [email protected] > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > _______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
