There is also a manufacturer right in L.A. - Anvil Cases. They've made cases for years - especially for the music industry. Don't think they have waterproof, but do have some water-resistant, so unless you're dropping your equipment into pools, they might work, plus since they are local, you might be able to go right to the source to see what they have. Like Pelican, foam pieces easily reconfigured to match equipment.
-- Antony Tersol Solex / Applied Solar Energy 831-333-1919 Your wrote: Message: 5 Date: Thu, 12 Aug 2010 09:01:43 -0700 From: "Peter Parrish" <[email protected]> To: "'RE-wrenches'" <[email protected]> Subject: [RE-wrenches] Padded equipment cases. Message-ID: <53532c1555dd4059a92655d5fc914...@angeles> Content-Type: text/plain; charset="iso-8859-1" I seem to remember reading about a source of "custom padded equipment cases", but can't remember when and where I did so. What I am talking about is a sturdy (e.g. Al) case with closed cell foam in the top and bottom halves and then a third inner 2" or 3" layer of foam with cutouts for sensitive equipment. I am thinking of our DayStar irradiance meter, our SunEye, DMM, IR thermometer, clamp-on ammeter, digital camera and the like. I am not interested in buying a "kit". I would like to specify the outlines for each piece of equipment and have the cutouts done in a professional manner. Has anyone ordered one or know of a source? - Peter Peter T. Parrish, Ph.D., President California Solar Engineering, Inc. 820 Cynthia Ave., Los Angeles, CA 90065 CA Lic. 854779, NABCEP Cert. 031806-26 [email protected] Ph 323-258-8883, Mobile 323-839-6108, Fax 323-258-8885
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
