Thanks everyone for the feedback on my question! Todd
On Friday, October 1, 2010 9:32am, "Larry Crutcher" <[email protected]> said: > Todd, > > The shunt is only providing a mV DC signal. In our showroom we have a > working display wall of charge controllers and battery monitors (Blue > Sky, Trimetric, Morningstar, analog meters) with a single shunt to a > single battery. Works well for us. More than likely there is isolation > before the AD converter so I would not expect any problems with any > monitor. > > Prescaler may be a different story although I suspect it will work. It > is just converting a high voltage reference to a low one that the > battery monitor can accept. If there was an issue I would try a small > DC-DC device at the prescaler outputs going to each monitor. > > Larry Crutcher > Starlight Solar Power Systems > > On Oct 1, 2010, at 2:22 AM, Todd Cory wrote: > > > Has anyone ever paralleled two amp hour meters on one shunt? How > > about paralleling two e-meters on a single shunt and a single > > prescaler? > > > > Todd > > _______________________________________________ > List sponsored by Home Power magazine > > List Address: [email protected] > > Options & settings: > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org > > List-Archive: > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org > > List rules & etiquette: > www.re-wrenches.org/etiquette.htm > > Check out participant bios: > www.members.re-wrenches.org > > Sent from Finest Planet WebMail.
_______________________________________________ List sponsored by Home Power magazine List Address: [email protected] Options & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out participant bios: www.members.re-wrenches.org
