Chris,
You've probably already considered and rejected this... Unisolar PVL modules on
standing seam roofing. Solves the structure & wind problems. Goes fast if
installed on the pans before they go on the roof. Price is pretty good per watt
now.
Can't beat the look. Made in USA. I think the only downside is you may not have
enough area to place 5kW.
I bet it's getting cold in Montana. You could stick the modules on the pans in a
heated space somewhere. This would really cut down your time and exposure on the
roof.
Dick Ratico
Solarwind Electric
--- You wrote:
Dear Wrenches
have a composite (shingle) roof at hand, and the owner wants to upgrade it
to a metal roof and install a 5kw+ array on it. The rafters are those
(sort of) particle board I-beams covered with 1/2" plywood (and shingles).
What's the best metal roofing you could suggest--and would you beef up the
wood to lag into?
Thanks for all your input.
Chris Daum
Oasis Montana Inc.
406-777-4309
406-777-0830 fax
--- end of quote ---
_______________________________________________
List sponsored by Home Power magazine
List Address: [email protected]
Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
